Latest Standards

Standards

Standards

Keep up to date with all the latest standards.

  • BS EN55032:2015+A1:2020 – Electromagnetic compatibility of multimedia equipment. Emission requirements – Current

 

  • BS EN55035:2017 - Electromagnetic compatibility of multimedia equipment. Immunity requirements - Current

 

  • BS EN IEC61000-6-2:2019 ; Electromagnetic compatibility (EMC) - Generic standards. Immunity standard for industrial environments - Current Under Review

 

  • BS EN IEC 61000-6-3:2021 - TC - Electromagnetic compatibility (EMC) - Generic standards. Emission standard for equipment in residential environments - Current

 

  • BS EN61000-4-2:2009 - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Electrostatic discharge immunity test - Current Under Review

 

  • BS EN61000-4-3:2020 - TC - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test - Current

 

  • BS EN61000-4-4:2012 - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Electrical fast transient/burst immunity test - Current Under Review

 

  • BS EN61000-4-5:2014 +A1:2017 - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Surge immunity test- Current

 

  • BS EN IEC 62368-1:2020+A11:2020 - Audio/video, information and communication technology equipment - Safety requirements - Current, Under Review

 

  • BS EN61000-4-6:2014 - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields - Current Under Review

 

  • BS EN61000-4-7:2002 +A2:2009 - Electromagnetic compatibility (EMC). Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto - Current

 

  • BS EN61000-4-8:2010 - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Power frequency magnetic field immunity test - Current Under Review

 

  • BS EN61000-4-9:2016 - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Impulse magnetic field immunity test - Current

 

  • BS EN61000-4-10:2017 - TC - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Damped oscillatory magnetic field immunity test - Current Under Review

 

  • BS EN61000-4-11:2020 - Electromagnetic compatibility (EMC) - Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase - Current

 

  • BS EN61000-4-12:TC – Electromagnetic Compatibility (EMC) – Testing and measurement techniques. Ring wave immunity test – Current Under Review

 

  • BS EN60335-1:2012+A15:2021 – Household and similar electrical appliances. Safety – General requirements – Current
  • Page 1

Standards

Keep up to date with all the latest standards.

  • BS EN 62368-1:2014+A11:2017 - Audio/video, information and communication technology equipment - Safety requirements - Current, Under Review

EMC Designated Standards

No Reference of standard
1. EN 617:2001+A1:2010
Continuous handling equipment and systems - Safety and EMC requirements for the equipment
for the storage of bulk materials in silos, bunkers, bins and hoppers

2. EN 618:2002+A1:2010
Continuous handling equipment and systems - Safety and EMC requirements for
equipment for mechanical handling of bulk materials except fixed belt conveyors

3. EN 619:2002+A1:2010
Continuous handling equipment and systems - Safety and EMC requirements for equipment for
mechanical handling of unit loads

4. EN 620:2002+A1:2010
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt
conveyors for bulk materials

5. EN 1155:1997
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and
test methods

EN 1155:1997/A1:2002
6. EN 12015:2014
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks -
Emission

7. EN 12016:2013
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks -
Immunity

8. EN 12895:2015
Industrial trucks - Electromagnetic compatibility

9. EN 12895:2015+A1:2019Industrial trucks - Electromagnetic compatibility

10. EN 13241-1:2003+A1:2011
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products
without fire resistance or smoke control characteristics

11. EN 13309:2010
Construction machinery - Electromagnetic compatibility of machines with internal power supply

12. EN ISO 13766-1:2018
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of
machines with internal electrical power supply - Part 1: General EMC
requirements under typical electromagnetic environmental conditions (ISO 13766-1:2018)

13. EN 14010:2003+A1:2009
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC
requirements for design, manufacturing, erection and commissioning stages

14. EN ISO 14982:2009
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and
acceptance criteria (ISO 14982:1998)

15. EN 16361:2013+A1:2016
Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian
doorsets, other than swing type, initially designed for installation with power operation

16. EN 50065-1:2011
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part
1: General requirements, frequency bands and electromagnetic disturbances

17. EN 50065-2-1:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part
2-1: Immunity requirements for mains communications equipment and systems operating in the
range of frequencies 95 kHz to 148,5 kHz and intended for use in
residential, commercial and light industrial environments
EN 50065-2-1:2003/A1:2005
EN 50065-2-1:2003/AC:2003

18. EN 50065-2-2:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part
2-2: Immunity requirements for mains communications equipment and systems operating in the
range of frequencies 95 kHz to 148,5 kHz and intended for use in
industrial environments
EN 50065-2-2:2003/A1:2005
EN 50065-2- 2:2003/A1:2005/AC:2006
EN 50065-2-2:2003/AC:2003

19. EN 50065-2-3:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part
2-3: Immunity requirements for mains communications equipment and systems operating in the
range of frequencies
3 kHz to 95 kHz and intended for use by electricity suppliers and distributors
EN 50065-2-3:2003/A1:2005
EN 50065-2-3:2003/AC:2003

20. EN 50083-2:2012
Cable networks for television signals, sound signals and interactive services - Part 2:
Electromagnetic compatibility for equipment
EN 50083-2:2012/A1:2015

21. EN 50121-1:2006
Railway applications - Electromagnetic compatibility - Part 1: General
EN 50121-1:2006/AC:2008

22. EN 50121-2:2006
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway
system to the outside world
EN 50121-2:2006/AC:2008

23. EN 50121-3-1:2017
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and
complete vehicle24. EN 50121-3-2:2016
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

25. EN 50121-4:2016
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the
signalling and telecommunications apparatus

26. EN 50121-5:2017
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed
power supply installations and apparatus

27. EN 50130-4:2011
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity
requirements for components of fire, intruder, hold up, CCTV, access control and social alarm
systems

28. EN 50148:1995
Electronic taximeters

29. EN 50270:2015
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of
combustible gases, toxic gases or oxygen
EN 50270:2015/AC:2016-08

30. EN 50293:2012
Road traffic signal systems - Electromagnetic compatibility
31. EN 50370-1:2005
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1:
Emission

32. EN 50370-2:2003
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2:
Immunity

33. EN 50412-2-1:2005
Power line communication apparatus and systems used in low-voltage installations in the
frequency range 1,6 MHz to 30 MHz - Part 2-1: Residential, commercial and
industrial environment - Immunity requirements
EN 50412-2-1:2005/AC:2009

34. EN 50428:2005
Switches for household and similar fixed electrical installations - Collateral standard - Switches
and related accessories for use in home and building electronic systems (HBES)
EN 50428:2005/A1:2007
EN 50428:2005/A2:2009

35. EN 50470-1:2006
Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions -
Metering equipment (class indexes A, B and C)

36. EN 50490:2008
Electrical installations for lighting and beaconing of aerodromes - Technical requirements for
aeronautical ground lighting control and monitoring systems - Units for selective switching and
monitoring of individual lamps

37. EN 50491-5-1:2010
General requirements for Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test setup

38. EN 50491-5-2:2010
General requirements for Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS
used in residential, commercial and light industry environment

39. EN 50491-5-3:2010
General requirements for Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used
in industry environment

40. EN 50498:2010
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic
equipment in vehicles

41. EN 50512:2009
Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking
Guidance Systems (A-VDGS)

42. EN 50529-1:2010
EMC Network Standard - Part 1: Wire-line telecommunications networks using telephone wires
01/01/2021 0007/21
5

43. EN 50529-2:2010
EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables

44. EN 50550:2011
Power frequency overvoltage protective device for household and similar applications (POP)
EN 50550:2011/AC:2012
EN 50550:2011/A1:2014

45. EN 50557:2011
Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for
household and similar uses

46. EN 50561-1:2013
Power line communication apparatus used in low-voltage installations - Radio disturbance
characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
EN 50561-1:2013/AC:2015

47. EN 55011:2009
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics -
Limits and methods of measurement
EN 55011:2009/A1:2010

48. EN 55011:2016
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics -
Limits and methods of measurement
EN 55011:2016/A1:2017
EN 55011:2016/A11:2020

49. EN 55012:2007
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits
and methods of measurement for the protection of off-board receivers
EN 55012:2007/A1:2009

50. EN 55014-1:2006
Electromagnetic compatibility - Requirements for household appliances, electric tools and
similar apparatus - Part 1: Emission
EN 55014-1:2006/A1:2009
EN 55014-1:2006/A2:2011

51. EN 55014-1:2017
Electromagnetic compatibility - Requirements for household appliances, electric tools and
similar apparatus - Part 1: Emission
EN 55014-1:2017/A11:2020

52. EN 55014-2:1997
Electromagnetic compatibility - Requirements for household appliances, electric tools and
similar apparatus - Part 2: Immunity - Product family standard
EN 55014-2:1997/A1:2001
EN 55014-2:1997/A2:2008
EN 55014-2:1997/AC:1997

53. EN 55015:2013
Limits and methods of measurement of radio disturbance characteristics of electrical lighting
and similar equipment

54. EN IEC 55015:2019
Limits and methods of measurement of radio disturbance characteristics of electrical lighting
and similar equipment
EN IEC 55015:2019/A11:2020

55. EN 55024:2010
Information technology equipment - Immunity characteristics - Limits and methods of
measurement
01/01/2021 0007/21
6

56. EN 55032:2012
Electromagnetic compatibility of multimedia equipment - Emission requirements
EN 55032:2012/AC:2013

57. EN 55032:2015
Electromagnetic compatibility of multimedia equipment - Emission Requirements
EN 55032:2015/A11:2020

58. EN 55035:2017
Electromagnetic compatibility of multimedia equipment - Immunity requirements

59. EN 55103-1:2009
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use - Part 1: Emissions
EN 55103-1:2009/A1:2012

60. EN 55103-2:2009
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use - Part 2: Immunity

61. EN 60034-1:2010
Rotating electrical machines - Part 1: Rating and performance
EN 60034-1:2010/AC:2010

62. EN 60204-31:2013
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC
requirements for sewing machines, units and systems

63. EN 60255-26:2013
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility
requirements
EN 60255-26:2013/AC:2013

64. EN 60669-2-1:2004
Switches for household and similar fixed electrical installations - Part 2-1: Particular
requirements - Electronic switches
EN 60669-2-1:2004/A1:2009
EN 60669-2-1:2004/A12:2010
EN 60669-2-1:2004/AC:2007

65. EN 60730-1:2011

Automatic electrical controls for household and similar use - Part 1: General requirements

66. EN 60730-2-5:2002
Automatic electrical controls for household and similar use - Part 2-5: Particular requirements
for automatic electrical burner control systems
EN 60730-2-5:2002/A11:2005
EN 60730-2-5:2002/A1:2004
EN 60730-2-5:2002/A2:2010

67. EN 60730-2-6:2008
Automatic electrical controls for household and similar use - Part 2-6: Particular requirements
for automatic electrical pressure sensing controls including mechanical requirements

68. EN 60730-2-7:2010
Automatic electrical controls for household and similar use - Part 2-7: Particular requirements
for timers and time switches
EN 60730-2-7:2010/AC:2011

69. EN 60730-2-8:2002
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements
for electrically operated water valves, including mechanical requirements
EN 60730-2-8:2002/A1:2003

70. EN 60730-2-9:2010
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements
for temperature sensing controls

71. EN 60730-2-14:1997
Automatic electrical controls for household and similar use - Part 2-14: Particular requirements
for electric actuators
EN 60730-2-14:1997/A1:2001

72. EN 60730-2-15:2010
Automatic electrical controls for household and similar use - Part 2-15: Particular requirements
for automatic electrical air flow, water flow and water level sensing controls

73. EN 60870-2-1:1996
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply
and electromagnetic compatibility

74. EN 60945:2002
Maritime navigation and radiocommunication equipment and systems - General requirements -
Methods of testing and required test results

75. EN 60947-1:2007
Low-voltage switchgear and controlgear - Part 1: General rules
EN 60947-1:2007/A1:2011
EN 60947-1:2007/A2:2014

76. EN 60947-2:2006
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
EN 60947-2:2006/A1:2009
EN 60947-2:2006/A2:2013

77. EN 60947-3:2009
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switchdisconnectors and fuse-combination units
EN 60947-3:2009/A1:2012

78. EN 60947-4-1:2010
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters -
Electromechanical contactors and motor- starters
EN 60947-4-1:2010/A1:2012

79. EN IEC 60947-4-1:2019
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters -
Electromechanical contactors and motor- starters

80. EN 60947-4-2:2012
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC
semiconductor motor controllers and starters

81. EN 60947-4-3:2014
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC
semiconductor controllers and contactors for non-motor loads

82. EN 60947-5-1:2004
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching
elements - Electromechanical control circuit devices
EN 60947-5-1:2004/A1:2009
EN 60947-5-1:2004/AC:2004
EN 60947-5-1:2004/AC:2005

83. EN 60947-5-2:2007
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching
elements - Proximity switches
EN 60947-5-2:2007/A1:2012
01/01/2021 0007/21
8

84. EN 60947-5-3:1999
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching
elements - Requirements for proximity devices with defined behaviour under fault conditions
(PDF)
EN 60947-5-3:1999/A1:2005

85. EN 60947-5-6:2000
Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching
elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

86. EN 60947-5-7:2003
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching
elements - Requirements for proximity devices with analogue output

87. EN 60947-5-9:2007
Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching
elements - Flow rate switches

88. EN 60947-6-1:2005
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer
switching equipment
EN 60947-6-1:2005/A1:2014

89. EN 60947-6-2:2003
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and
protective switching devices (or equipment) (CPS)
EN 60947-6-2:2003/A1:2007

90. EN 60947-8:2003
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection
(PTC) for rotating electrical machines
EN 60947-8:2003/A1:2006
EN 60947-8:2003/A2:2012

91. EN IEC 60947-9-1:2019
Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc
quenching devices

92. EN 60974-10:2014
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

93. EN 61000-3-2:2014
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
(equipment input current ≤ 16 A per phase)

94. EN 61000-3-3:2013
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low- voltage supply systems, for equipment with
rated current <= 16 A per phase and not subject to conditional connection 95. EN 61000-3-11:2000 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems - Equipment with rated current 16 A and <= 75 A per phase 97. EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments 98. EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments EN 61000-6-2:2005/AC:2005 99. EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light- industrial environments EN 61000-6- 3:2007/A1:2011/AC:2012 EN 61000-6-3:2007/A1:2011 100. EN 61000-6-4:2007 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments EN 61000-6-4:2007/A1:2011 101. EN 61000-6-5:2015 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment EN 61000-6-5:2015/AC:2018-01 102. EN 61008-1:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules EN 61008-1:2012/A1:2014 103. EN 61009-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules 104. EN IEC 61058-1:2018 Switches for appliances - Part 1: General requirements 105. EN 61131-2:2007 Programmable controllers - Part 2: Equipment requirements and tests 106. EN 61204-3:2000 Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) 107. EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements 108. EN 61326-2-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2- 1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications 109. EN 61326-2-2:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2- 2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems 110. EN 61326-2-3:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2- 3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning 111. EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2- 4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 01/01/2021 0007/21 10 112. EN 61326-2-5:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2- 5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 113. EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules Notice: EN 61439-1:2011 does not give presumption of conformity without another part of the standard. 114. EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies 115. EN 61439-3:2012 Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) EN 61439-3:2012/AC:2019-04 116. EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) 117. EN 61439-5:2011 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks 118. EN 61439-6:2012 Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) 119. EN 61543:1995 Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility EN 61543:1995/A11:2003 EN 61543:1995/A12:2005 EN 61543:1995/A2:2006 EN 61543:1995/A11:2003/AC:2004 EN 61543:1995/AC:1997 120. EN 61547:2009 Equipment for general lighting purposes - EMC immunity requirements 121. EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) 122. EN 61800-3:2004 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods EN 61800-3:2004/A1:2012 123. EN 61812-1:2011 Time relays for industrial and residential use - Part 1: Requirements and tests 124. EN 62020:1998 Electrical accessories - Residual current monitors for household and similar uses (RCMs) EN 62020:1998/A1:2005 01/01/2021 0007/21 11 125. EN 62026-1:2007 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules Notice: EN 62026-1:2007 does not give presumption of conformity without another part of the standard 126. EN 62026-2:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) 127. EN 62026-2:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)EN 62026-2:2013/A1:2019 128. EN 62026-3:2009 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet 129. EN 62026-7:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet 130. EN 62040-2:2006 Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirementsEN 62040-2:2006/AC:2006 131. EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment Notice: EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series. 132. EN 62052-21:2004 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment Notice: EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series. 133. EN 62053-11:2003 Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) 134. EN 62053-21:2003 Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) 135. EN 62053-22:2003 Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) 136. EN 62053-23:2003 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) 137. EN 62054-11:2004 Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers 138. EN 62054-21:2004 Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches 01/01/2021 0007/21 12 139. EN 62135-2:2008 Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements 140. EN 62310-2:2007 Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements 141. EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses 142. EN 62586-1:2014 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) 143. EN 62586-2:2014 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements 144. EN 62606:2013 General requirements for arc fault detection devices 145. EN 63024:2018 Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses 146. EN 300 386 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements 147. EN 301 489-1 V1.9.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements 148. EN 301 489-34 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones 1. EN 12895:2015 Industrial trucks - Electromagnetic compatibility 18 November 2021 2. EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply 30 June 2021 3. EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses 17 January 2021 4. EN 55011:2009 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement EN 55011:2009/A1:2010 4 May 2022 5. EN 55014-1:2006 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission EN 55014-1:2006/A1:2009 EN 55014-1:2006/A2:2011 4 May 2022 6. EN 55015:2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 4 May 2022 7. EN 55032:2012 Electromagnetic compatibility of multimedia equipment - Emission requirements EN 55032:2012/AC:2013 4 May 2022 8. EN 55103-2:2009 Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity 18 November 2021 9. EN 62026-2:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-

UKCA LVD Designated Standards

1. EN ISO 11252:2013
Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
(ISO 11252:2013)

2. EN 13637:2015
Building hardware - Electrically controlled exit systems for use on escape routes -
Requirements and test methods

3. HD 308 S2:2001
Identification of cores in cables and flexible cords

4. HD 361 S3:1999
System for cable designation
HD 361 S3:1999/A1:2006
HD 361 S3:1999/AC:1999

5. HD 368 S1:1978
Direct acting recording electrical measuring instruments and their accessories

6. HD 549 S1:1989
Conference systems - Electrical and audio requirements

7. HD 597 S1:1992
Coupling capacitors and capacitor dividers
HD 597 S1:1992/AC:1992

8. HD 603 S1:1994
Distribution cables of rated voltage 0,6/1 kV
HD 603 S1:1994/A3:2007
HD 603 S1:1994/A1:1997
HD 603 S1:1994/A2:2003

9. HD 604 S1:1994
0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations
HD 604 S1:1994/A3:2005
HD 604 S1:1994/A1:1997
HD 604 S1:1994/A2:2002

10. HD 605 S2:2008
Electric cables - Additional test methods
HD 605 S2:2008/AC:2010

11. HD 626 S1:1996
Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV
HD 626 S1:1996/A1:1997
HD 626 S1:1996/A2:2002

12. HD 627 S1:1996
Multicore and multipair cables for installation above and below ground
HD 627 S1:1996/A1:2000
HD 627 S1:1996/A2:2005
01/01/2021 0009/21
3

13. HD 639 S1:2002
Electrical accessories - Portable residual current devices without integral overcurrent protection
for household and similar use (PRCDs)
HD 639 S1:2002/A1:2003
HD 639 S1:2002/A2:2010
HD 639 S1:2002/AC:2003

14. EN 50065-4-2:2001
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and
1,6 MHz to 30 MHz - Part 4-2: Low voltage decoupling filters - Safety requirements
EN 50065-4-2:2001/A1:2003
EN 50065-4-2:2001/A2:2005

15. EN 50065-4-7:2005
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and
1,6 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements
EN 50065-4-7:2005/AC:2006

16. EN 50085-1:2005
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General
requirements
EN 50085-1:2005/A1:2013

17. EN 50085-2-1:2006
Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Cable
trunking systems and cable ducting systems intended for mounting on walls and ceilings
EN 50085-2-1:2006/A1:2011

18. EN 50085-2-2:2008
Cable trunking systems and cable ducting systems for electrical installations - Part 2-2:
Particular requirements for cable trunking systems and cable ducting systems intended for
mounting underfloor, flushfloor, or onfloor

19. EN 50085-2-3:2010
Cable trunking systems and cable ducting systems for electrical installations - Part 2-3:
Particular requirements for slotted cable trunking systems intended for installation in cabinets

20. EN 50085-2-4:2009
Cable trunking systems and cable ducting systems for electrical installations - Part 2-4:
Particular requirements for service poles and service posts

21. EN 50106:2008
Safety of household and similar electrical appliances - Particular rules for routine tests referring
to appliances under the scope of EN 60335-1

22. EN 50117-1:2002
Coaxial cables - Part 1: Generic specification
EN 50117-1:2002/A1:2006
EN 50117-1:2002/A2:2013

23. EN 50117-2-1:2005
Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks
- Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
EN 50117-2-1:2005/A1:2008
EN 50117-2-1:2005/A2:2013

24. EN 50117-2-2:2004
Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks
- Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz
EN 50117-2-2:2004/A1:2008
EN 50117-2-2:2004/A2:2013

25. EN 50117-2-3:2004
Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks
- Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz
EN 50117-2-3:2004/A1:2008
EN 50117-2-3:2004/A2:2013

26. EN 50117-2-4:2004
Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks
- Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
EN 50117-2-4:2004/A1:2008
EN 50117-2-4:2004/A2:2013

27. EN 50117-2-5:2004
Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks
- Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz
EN 50117-2-5:2004/AC:2012
EN 50117-2-5:2004/A1:2008
EN 50117-2-5:2004/A2:2013

28. EN 50117-3-1:2002
Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom applications -
Miniaturized cables used in digital communication systems

29. EN 50117-4-1:2008
Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with
EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
EN 50117-4-1:2008/A1:2013

30. EN 50117-4-2:2015
Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled
distribution networks

31. EN 50156-1:2015
Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application
design and installation

32. EN 50156-2:2015
Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design,
development and type approval of safety devices and subsystems

33. EN 50178:1997
Electronic equipment for use in power installations

34. EN 50214:2006
Flat polyvinyl chloride sheathed flexible cables
EN 50214:2006/AC:2007

35. EN 50250:2002
Conversion adaptors for industrial use
EN 50250:2002/A1:2015
EN 50250:2002/AC:2007

36. EN 50274:2002
Low-voltage switchgear and controlgear assemblies - Protection against electric shock -
Protection against unintentional direct contact with hazardous live parts
EN 50274:2002/AC:2009

More will be posted soon...